Everco Advance Industries Sdn Bhd
37, Jalan Bakawali 41,
Taman Johor Jaya,
81100 Johor Bahru,
Johor, Malaysia.
+607-2889366
+607-2889266

Fabricated Steel Elevator Bucket

Previous ‹‹ » Next

Fabricated Steel Elevator Bucket


Material : Carbon Steel / Stainless Steel                                
Features :                                
• Manufactured by folding, punching, and welding.                                 
• Well suited to hot applications or when extremely sharp products are carried in bucket elevators.                                 
• Allow almost an infinite number of bucket designs to be realized, these could include thicker wear resistant leading edges, specialized bucket shapes and sizes, etc.                                
Using Recommendations :                            
• Minimum bucket spacing: bucket projection “B” +25mm                                 
• Mounting holes can be customized on request                                
                                
Technical Specifications :
Model Bucket Dimension* (mm) Mounting Holes (mm) Capacity (L)
Length A Proj. B Depth C Distance Down D  PCD E Standard Punching Holes Hole Diameter Usable Capacity Full Capacity
FSE2315 230 156 156 40 58 3 6.5 2.715 3.58
FSE2615 260 156 156 45 68 3 6.5 3.069 4.047
FSE2915 290 156 156 48 78 3 6.5 3.42 4.51
FSE3016 300 165 160 52 86 4 6.5 3.79 5.038
FSE3218 320 180 180 62 86 4 6.5 4.86 6.45
FSE3522 355 220 205 90 76 5 8 8.15 9.31
FSE3618 365 180 180 90 76 5 8 5.546 7.36
FSE3620 365 206 206 90 76 5 8 7.642 9.576
FSE4022 405 220 210 90 73 6 8 9.298 11.42
FSE4522 455 220 210 90 79 6 8 10.445 12.83
            

• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.                
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.                 
• A direct replacement for many other international brands.                 
• Unique elevator bucket design with multiple patents.                 
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.

Material HDPE Nylon 6 UHMWPE PU Mild Steel Stainless
Cost 1 3 3 4 2 4
Wear Resistance 1 2 3 4 3 4
Impact Resistance 1 2 2 2 2 2
FDA Food Approved Yes Yes Yes No No No
Max Temp튠Continuous 70 100 70 60 180+ 250+
Max Temp튠Peak 80 120 80 70 220 400

              
Remark: Code 1=low  4=high                                
                                
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .                                
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.                                
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking,                                 
now water absorption, light weight properties.Higher cost performance products.                                
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.                                
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.                                
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.