Material : Carbon Steel / Stainless Steel                                
Features :                                
• Manufactured by folding, punching, and welding.                                 
• Well suited to hot applications or when extremely sharp products are carried in bucket elevators.                                 
• Allow almost an infinite number of bucket designs to be realized, these could include thicker wear resistant leading edges, specialized bucket shapes and sizes, etc.                                
Using Recommendations :                            
• Minimum bucket spacing: bucket projection “B” +25mm                                 
• Mounting holes can be customized on request                                
                                
Technical Specifications :

Model	Bucket Dimension* (mm)			Mounting Holes (mm)				Capacity (L)
	Length A	Proj. B	Depth C	Distance Down D	PCD E	Standard Punching Holes	Hole Diameter	Usable Capacity	Full Capacity
FSE2315	230	156	156	40	58	3	6.5	2.715	3.58
FSE2615	260	156	156	45	68	3	6.5	3.069	4.047
FSE2915	290	156	156	48	78	3	6.5	3.42	4.51
FSE3016	300	165	160	52	86	4	6.5	3.79	5.038
FSE3218	320	180	180	62	86	4	6.5	4.86	6.45
FSE3522	355	220	205	90	76	5	8	8.15	9.31
FSE3618	365	180	180	90	76	5	8	5.546	7.36
FSE3620	365	206	206	90	76	5	8	7.642	9.576
FSE4022	405	220	210	90	73	6	8	9.298	11.42
FSE4522	455	220	210	90	79	6	8	10.445	12.83

            

• High impact, abrasion resistance, no-corrosion, smooth surface, FDA Food proved.                
• Less weight, prolong service life of buckets and belts, reduce elevator consumption.                 
• A direct replacement for many other international brands.                 
• Unique elevator bucket design with multiple patents.                 
• Our elevator buckets are well regarded, worldwide for high cost /quality ratio.

Material	HDPE	Nylon 6	UHMWPE	PU	Mild Steel	Stainless
Cost	1	3	3	4	2	4
Wear Resistance	1	2	3	4	3	4
Impact Resistance	1	2	2	2	2	2
FDA Food Approved	Yes	Yes	Yes	No	No	No
Max Temp℃ Continuous	70	100	70	60	180+	250+
Max Temp℃ Peak	80	120	80	70	220	400

              
Remark: Code 1=low  4=high                                
                                
• HDPE : Tough and lexible, suitable for handling grains, foodstuffs, and other products with no sharp edges and material that has a bulk density of less than1g/cm³ .                                
• Nylon : High impact and abrasion resistance, better heat resistance and are well suited for handling hot, abrasive and sticky products.                                
• UHMWPE : Extremely abrasion resistance, corrosion resistant, impact absorbing properties, low temperature resistant, sanitary (FDA approved), Non-caking and sticking,                                 
now water absorption, light weight properties.Higher cost performance products.                                
• PU : Extremely abrasion resistance, tough and lexible, and are suitable for handling sharp, cutting and sticky products.                                
• Mild Steel : General purpose, long life, well suited to agricultural and industrial products.                                
• Stainless Steel : Food grade, corrosive resistance, suitable for food and high temperature applications.